Neu gekaufte WarenRestocken

Beschreibung Features: 1.Features: This is an universal alignment kit for centering of the clutch disc, stable performance and high reliability. 2.Main Function: Alignment repair tool is used for fast accurate alignment of flywheel pilot hole and clutch drive plate when repair clutch. 3.Package Information: This clutch alignment tool kit comes fully equipped with 8 spigot adaptors, 3 expanding mandrels, complete and practical. 4.Stable Characteristics: Professional manufacturing, high accuracy, stable characteristics and high reliability, dependable for use. 5.Quality Material: Universal clutch alignment tool is made of excellent quality metal material, anti rust and durable, sturdy and high strength.Specification:Item Type: Universal Clutch Alignment Tool Kit_x000D_Material: Metal_x000D_Package Include:_x000D__x000D_8 x Spigot Adaptors: 0.47in, 0.55in, 0.59in,0.63in, 0.67in, 0.7in, 0.75in, 0.78in (12mm, 14mm, 15mm, 16mm, 17mm, 18mm, 19mm, 20mm)_x000D__x000D_3 x Expanding Mandrels: 0.59in-0.75in, 0.78in-1.05in,0.9in-1.42in (15 -19 mm, 20 -26.6 mm, 23 -36 mm)_x000D__x000D__x000D__x000D_Operation Steps:_x000D_Step 1: First, insert the tool into the clutch disc. Make sure the clutch is facing the correct direction. The tool should stick all the way through the spines on the disc._x000D_Step 2: Then place the clutch on the flywheel, and engage the alignment tool into the pilot bushing or bearing in the center of the crankshaft. Push the clutch tight to the flywheel._x000D_Step 3: With the clutch on the flywheel, install the pressure plate to the flywheel and start the bolts._x000D_Step 4: Wiggle the alignment tool to make sure it is fully engaged and seated in the pilot bushing and bearing. Tighten the pressure plate bolts in a criss cross pattern and then torque to spec._x000D_Tip:_x000D_Before insert the tool into the clutch disc, please choose a suitable adaptor size to fit pilot bearing and connect with expanding mandrel._x000D_The clutch alignment tool stays in the clutch until you are ready to install the transmission. While the pressure place should hold the clutch from moving, dont take the risk of pulling the tool out too soon. Once the transmission is ready to install, pull the tool out, and slide the transmission into place.